Double Seam Inspection | Canneed Vietnam | Can need Vietnam | Pitesco Vietnam

     The CanNeed “Seam-X-On-Line X-Ray Automatic Seam Scanner” adopts non-destructive measurement method to measure the seam quality, suitable for measuring the aluminum cans, steel cans , aluminum-iron composite cans and etc. It’s applicable for online in producing department. It’s a non-destructive, cost saving, accurate measurement and automatic equipment which can be installed on the production line to improve the sampling frequency.

Advantages:
01)Non-destructive measurement, avoid wasting samples
02)Non-destructive measurement, avoid environmental pollution and save handling charges
03)High sampling frequency, reduce the isolation inferior
04)High sampling frequency, cost saving
05)Can track the chucks corresponding to the unqualified products
06)360-degree fully scan measurement
07)Can be suitable for various types of cans
08)Higher accuracy
09)Avoid manual measurement error
10)Durable
11)Accord with the worldwide safety standards

The CanNeed  STG-200-D Seam thickness gauge can be used to measure Seam thickness.  
With measure angle compensation. The center mesure point can be adjusted. 
Cans can be auto- positoned in the center easily during measuring .  
With the Mitutoyo 0.01mm Resolution Digital Indicator.   
If you purchase the adapter and cable, the instrument can communicate with a computer.  

An important part of any seam evaluation is the actual teardown of the can seam to determine tightness or wrinkle rating.
The automatic STR-100 Seam Stripper is a sensible, affordable,  
teardown method to prepare the double seam teardown analysis. 
One fast, safe teardown operation without damaging or 
 distorting the cover hook. 
Reduce teardown time for more frequent inspections.   
Tooling quick change in few seconds. Available in size from  
200 to 603 and for beverage, food, and aerosol cans. 
Efficient cut and strip both aluminium and steel cans in a single motion.  
10 seconds per can. 
Eliminates the repetitious actions by hand . 

The CanNeed SCG-200 Seamer clearance Gauge, a quick and accurate way to set up seamers.
To measure the roll height off the chuck and the lateral distance between the roll and chuck.

The CanNeed RPG-100 is able to scan profiles of seaming Rolls and Chucks (or other tooling - including carbide and ceramic tools) easily and quickly. The system can be used for acceptance testing for new seaming rolls or chucks, for quality assurance purposes and for stress analysis. Monitor tooling wear to replace rolls and chucks only when they need to be replaced

The CanNeed "Seam Sight 3B Portable Full Automatic Seam Monitor" is so small and portable to work with a laptop. It was packed with the CSS-P2 into a suitcase, specially designed for those who always on business trip.

The Canneed SLG-D Seam length gauge(digital)  can be used to measure Seam length (Seam height). 
Can is positoned by standing up during measuring.  
With the Mitutoyo 0.01mm Resolution Digital Indicator.   
If you purchase the adapter and cable,  
the instrument can communicate with a computer.